Menu
Cart 0

Wolff Hira-To Flat Hone Shear and Scissor Sharpening System

Wolff

  • $2,774.48


The fixture and clamp of the Wolff Hira-To Flat Hone are designed to Sharpen both right and left handed shears. The flat inside of the shear is clamped into the head of the fixture enabling you to set an accurate angle every time! The sliding arm allows you to convex the entire front surface of the shear. It's ergonomically designed and mimics free-hand sharpening perfectly. It has variable speed, forward and reverse, and a quick change head. You can create a factory look and a factory edge with this machine every time.We use it every time we sharpen hair shears with great results! It is available with either PSA (pressure sensitive adhesive) pads or Hook & Loop pads. See the video below of this machine in use!

 

ITEMS INCLUDED WITH MACHINE:

  • 5 Quick Change Plates
  • 1 Felt pad and diamond polishing paste
  • 30 Assorted Micron Discs
  • 1 Ceramic Water Stone(6000 grit)
  • Water Stone Holder 
  • 1 Training DVD
  • 1 Dust Mask & Safety Goggles
  • 1 Scissors Lube Bottle
  • 1 Owners Manual
  • 1 Set Adjusting Tool
  • 1 Small Repair Parts Kit
  • 1 Deluxe Screw Pliers Kit
  • Practice Shears

The sliding arm allows you to convex the entire front surface of the shear. That means no more missing the back side of the spine!!

The ergonomically correct fixture mimics free-hand sharpening perfectly! You can easily adjust for variable speed, forward and reverse, and the plates are changed out in a matter of a couple seconds! You can easily create a factory look and a factory edge!!!

BELOW ARE SOME FREQUENTLY ASKED QUESTIONS ABOUT THE HIRA-TO SHARPENING SYSTEM. IF YOU HAVE ANY FURTHER QUESTIONS PLEASE DON'T HESITATE TO CONTACT US BY EMAIL OR CALL US AT 512-364-9845

 

AS AN OFFICIAL DISTRIBUTOR, WE HAVE THE BEST PRICES IN THE COUNTRY FOR WOLFF SHARPENING MACHINES. WE STAND BEHIND ALL OF OUR PRODUCTS AND WILL PAY RETURN SHIPPING IF YOU ARE NOT 100% SATISFIED!!

 

Frequently Asked Questions

Q. What is a Flat Hone?

A: A flat hone is a machine fitted with a horizontal plate. An abrasive is applied to the plate either directly or with a plate system like the Hira-To.

Q. What's so special about this Flat Hone?

A: The Hira-To is not just a flat hone, it's a sharpening system! It's equipped with the same state of art, patented fixture as the Rapid Edge Sharpening System. This fixture has been proven time and time again in sharpening competitions across the country! It mimics free-hand factory sharpening perfectly and guarantees a consistent, quality edge every time!

Q. What are the differences between the Rapid Edge and the Hira-To?

A: Both are excellent machines! The main "functional" difference is the number of heads. The Hira-To is a single head system and the Rapid Edge is a five head system. On the Hira-To, you have to change abrasive plates as you sharpen. The Rapid Edge is designed so you can go from plate to plate. The other difference is the price.

Q. What kind of shears will the Hira-To® sharpen?

A: The Hira-To sharpening system is designed to sharpen hollow-ground/ high-end beauty and grooming shears. It will sharpen both convex and bevel edge shears equally well!

Q. What is the difference between a convex and bevel edged shear?

A: A convex shear has a clam shell face that flows from the spine (or top) of the blade to the edge. A bevel edged shear is normally face-ground and beveled at the edge similar to a knife.

Q. What do you mean by hollow-ground?

A: High-end beauty and grooming shears are hollowed out along the inside of the blade. This allows for less resistance while cutting and a smoother cut as well. The edge of the hollow is flattened from the back of the ride area behind the screw to the tip along the cutting edge. This is called the ride line and lends strength to the edge. This ride line must be re-established each time you sharpen!

Q. How do you re-establish the ride line?

A: The Hira-To sharpening system comes equipped with a 6000 grit ceramic water stone. You use this stone to work the inside of a hollow-ground shear to re-establish the ride line.

Q. Is it easy to sharpen a beauty shear

A: This system makes it simple, but it's not easy. You still must understand the complexities of the shear you are working. That is why the Hira-To comes with a DVD explaining the ins-and-outs of sharpening.

Q. What if I run into problems when I'm in the field sharpening?

A: Call Wolff's 800 number! They have a staff that is fully prepared to help you overcome any obstacles!

Q. What if the DVD isn't enough?

A: Wolff has an extensive one-on-one training program available! It is tailored to each individual to help you overcome in doubts you may have in this business.

Q. Do I have to come to Wolff in South Carolina to train?

A: Wolff has other training options available. Please contact us for an authorized trainer in your area!

Q. What happens if I buy a Hira-To® and then decide I don't like it?

A: Wolff has a 30 day money back policy on all its products!

Q. What happens if I buy a Hira-To® through one of your distributors and decide I don't like it?

A: Jones Sharpening is an official distributor for Wolff Industries. If you are unsatisfied with your purchase for any reason, you can return it for a prompt and full refund.

Q. How profitable is sharpening beauty shears?

A: Sharpening can be very profitable! The average charge to sharpen a beauty shear is $25.00 dollars per shear. It is like anything else in life! You'll get out of it what is put into it!

Q. How else can I make money in this business?

A: Selling beauty shears! Wolff has a full line of Wolff® brand shears for you to sell! They also carry the Kenchii, ProLine and Shark Fin lines of shears.

Q. Can the machine be converted to 240V?

A: Absolutely! Wolff can convert its machines to be used with 240V. The Hira-To is used all over the world, and there are no extra costs to have it converted.


We Also Recommend

Sale

Unavailable

Sold Out